Automatic Products 310 Operating & Service Manual Download Page 57

Page: 57 / 100

5.12

320 / inside door

Item

No.

Part No.

Description

Item

No.

Part No.

Description

600715

Door Weldment Only, Square.

600715- 1

Door Weldment Only, Euro.

16000087

Door Weldment Only, Odyssey

750141

Front Window, (44-5/8 X 26-7/8 X 1/8)

NOTE: Replacement Glass Must Be Hard
Tempered or Lexan Only.

460436

Window Edging (Order Per Inches) 143 total.

660612-1

Window Clamp And Light Assembly Complete,
Lock Side.

16600121-01 Odyssey Window Clamp and Light Assem.

Lock Side

600750-1

Window Clamp Only, Lock Side.

660612

Window Clamp And Light Assembly Complete,
Hinge Side.

16600121

Odyssey Window Clamp and Light Assem.,
Hinge Side

600750

Window Clamp Only, Hinge Side.

680607

Florescent Lamp Harness

380022-6

Florescent Lamp (F30T8/CW)

420398

Light Bulb Guard.

440423

End Cap, Light Bulb Guard.

380023-2

Starter (FS 4)

420062- 1

4-36 X 3/4 Screw, Round Head.

201-6R11

6-18 X 11/16 Screw, Round Head.

400193

Door Stop Rod.

114-41-8

1/4-20 X 1/2 Bolt, Hex Head.

420010-10 Washer

300151

Door Stop Anchor

200-6R6

#6 X 3/8 Screw, Round Head.

420051

Wire Clamp, Adhesive Back.

420035

Cable Clamp, Nylon.

202604

Lower Window Clamp.

276-8R6

8-32 X 3/8 Nibs Head.

640157

Lower Door Hinge Plate Assembly .

420003

Flat Head Socket Screw - 3/4 Ig.

420003-1

Flat Head Socket Screw - 1/2 Ig.

200576

Cover, Ballast Assembly.

202578

Mounting Bracket, Ballast.

660615

Ballast Assembly Complete, 117 V. Includes
items 25, 26 & 27

660616

Ballast Assembly Complete, 230 V.

380315

Ballast Only, 117 V.

380314

Ballast Only, 230 V.

200577

Cover, Ballast Plugs.

660592

Delivery Bin, See Page 5.16 For Detailed
Parts List.

276-8R6

Delivery Bin Mounting Screw.

420369

T Handle, 1/4 Turn.

118-10-8

10-24 X 1/2 Carriage Bolt.

404-10

#10-24 Hex Nut.

640216

T Handle Lock Arm.

Locks See Page 3.

600760

Locking Bar.

400112

Spring, Lock Bar.

202618

Striker Plate, Logic Level Door Switch.

660618

Striker, Power Interlock Switch.

460041

1/4 X 1/4 Gasket, Foam.

460752

Cling on, Frozen.

460751

Cling on, Cool.

14400013

Duct for Light Harness (Not Shown)

14400014

Duct Cover (Not Shown)

17400085

Decal, Select Here with Arrow (Not Shown)

Summary of Contents for 310





































































































Search results

Summary of Contents for 310

Reviews:

Related manuals for 310

Brands by name

Popular brands

Automatic Products 310, Operating & Service Manual

Search results

Summary of Contents for 310

Reviews:

Related manuals for 310

Brands by name

Popular brands