Automatic Products 310, Operating & Service Manual

Page: 13 / 100

2.02
DEX/UCS
The APi 120 supports DEX/UCS Communications
Protocol - NAMA Vending Industry Data Retrieval
Standard. The machine will automatically recognize the
DEX/UCS device when it is plugged into the control board
and will recognize when the device initiates the
communication protocol.The transmission/reception of
data to the device will then take place automatically.
Printer Support
The machine is able to print to a 40 character wide printer
connected to the serial port.The communication is as
specified by the user in the Printer Setup Menu .The
machine uses only standard printer control codes to
maximize the number of possible supported printers. The
machine is able to print any of the following types of
information set by a menu item in the MIS Menu heading:
• MIS Data
• Machine Setup/Configuration Parameters
• Diagnostic Information
When an attempt is made to output data to the printer
without a printer connected, an error message will be
displayed indicating that the printer is not connected.
components
The 20 Series Machines Support the 24V Micromech, executive, and MDB protocols for Coin Mechs,
Validators and Card Readers.
NOTE: DO NOT ATTEMPT TO OPERATE TWO DIFFERENT PERIPHERALS
SIMULTANEOUSLY. FOR EXAPMLE: MDB WITH PULSE OR MICROMECH.
Peripherals in Column 1 and 2 can work together and columns 4 and 5 can
work together.
Micro Mech Pulse Validator Executive MDB Coin Mechanism MDB Bill
24V 15 pin 24V Validator
Mars TRC-6010XV VN2502-U5E 540 TRC-6510 VN2502-U5M
VN4010XV VN2512-U5E 560 TRC-6512 VN2512-U5M
VFM1-L2-U4C VN-4510
VFM3-L2-U4C
CoinCo 9302 LF BA32SA 9302-GX BA32SA**
USD-L701 BA32R USQ-G701 BA32R
USQ-L701 USO-G703
USQ-L701
Conlux USLX-001-01F USLZ-004-01F USLZ-004-01F
CCM 5 G
The APi 20 Series will automaticaly determine at power up which peripherals are connected and configure itself
accordingly.