15
3.7 Setting the Program (on / off times)
Each zone relay can be programmed to be active during certain times of the
day. Two active periods can be programmed, between ON 1 and OFF 1 and
between ON 2 and OFF 2. The second on/off period can be skipped if not
required. A different program can be set for each day of the week.
Press the set button three times from the main screen to access the set
program option.
The icons SET and OK? Will be displayed with the PROGRAM icon flashing.
Press OK to accept the Set Program function.
Zone number 1 will be displayed flashing.
Use the + and – keys to cycle through to the zone which needs to be
programmed. Press OK.
The day of the week will flash (The time area will be blank) Press the + and –
keys if you want to select the day to be programmed and press OK to accept.
The timeslot icon [ON 1] will be displayed and the hours and minutes display
will flash.
Press + or – until the required ON time is displayed. The time will change in
ten-minute steps. Press OK to accept.
Press OK will advance the display as follows:
•
An ON time will advance to its corresponding OFF time. If an ON time
is programmed, its corresponding OFF time must be programmed for
that same day.
•
The default value for ON2 time is unused, “--:--“. To change this to a
usable ON/OFF slot, press the – button.
•
If ON2 time is set to unused, “--:--“, pressing OK will then allow you to
select a different day.
•
IMPORTANT:
If a day, eg Saturday and Sunday, does not require a
program, then adjust ON1 time from “00:00” to unused, “--:--“.
(Press the + button until it changes from “23:50” to “--:--“.)
Summary of Contents for UNI/L version
Page 27: ...27 ...