Ver 6.0 IntelliClimate Installation Guide (21 August 2020)
Copyright©2020 Autogrow Systems Ltd
7
Humidifier or fogger
This output can drive either a standard fan-based fogger or ultrasonic humidifier or alternatively
a nozzle-type fogger. When humidifier is selected, the function is very simple with the humidifier
coming on when the humidity is too low and going off when the offset is reached. When fogger
is selected, the operation is similar except when it is calling for humidification the output is pulsed
on and off producing small amount of fog and allowing time for each amount to dissipate before
the next.
*On IntelliGrow
Heater, Dehumidifier and CO
2
The purpose and function of these devices is self-explanatory, and they all work to keep the
temperature, humidity and CO
2
close to the set points. In the advanced settings of IntelliGrow,
you will see switching offsets for each device. This allows you to set the offset from the main set
point at which it will turn on and another offset at which it will turn off. Although these come
preset to typical values that will avoid excessive overshoot or rapid cycling in most growrooms,
it is possible for the user to customise them to achieve optimal performance.
Selection of units
The grower can
determine the temperature units they are familiar with, C˚ or F˚ and they can set
the proper date format (DD/MM/YY or MM/DD/YY).
Advanced settings and rules
These settings and rules are pre-set to typical values that suit the majority of growrooms,
however, expert users may wish to alter them to achieve optimal performance.
Note:
the
advanced settings are only accessible via IntelliGrow and are not available from the controller
LCD menu system.
