Ver 6.0 IntelliClimate Installation Guide (21 August 2020)
Copyright©2020 Autogrow Systems Ltd
14
CO
2
rules
CO
2
injection is allowed when not venting. You can choose to allow CO
2
to inject when the
Fan 1 is running. This is useful if your Fan 1 is an HAF (air flow) fan. If your Fan 1 is an
exhaust fan, tick the box to allow the IntelliClimate to reduce CO
2
injection to avoid
wastage.
If your light levels are below this number, your CO
2
will not inject. Please adjust your
EnviroSensor so it gets a light reading or login to IntelliGrow and change this setting. For
further assistance, please contact
*On IntelliGrow
Most growers will want to minimize wastage of CO
2
, so you have a few options to choose
from. You can choose to allow the temperature set points to rise or fall to cycle CO
2
most
efficiently.
*On IntelliGrow
If it is hot and the room is frequently venting, you can reduce CO
2
injections. You can
override these settings and control your CO
2
by setting inject, wait and vent times to work
for your specific growroom.
*On IntelliGrow
IMPORTANT:
The IntelliClimate has a factory default to only allow CO
2
injection when
the light readings are above 10w/m2
