INSTRUCTIONS MAGRO-35A
Page 13
SWING GATE OPENER
A3/B3
Time of opening - high speed.
High speed operating time during gate
opening.
0~99s
10s
This is the time it takes
to Open/Close the gate
for the Fast Speed part
of the sequence.
A5/B5
Time of closing - high speed.
High speed operating time during gate
closing.
0~99s
10s
A6/B6
Force of opening and closing - slow speed.
Force adjustment for low speed operating
during open and close.
0~99
56
This is the force the
motor applies on the
gates. If the gates are
heavy, you will need
more force to speed up
the opening and
closing of the gates.
(Note: if the gates can
open/close into position,
you do not need to
adjust the default
settings.)
A7/B7
Force of opening and closing - high speed.
Force adjustment for high speed operating
during open and close.
0~99
99
Reverse swing of motor A.
C0
If you choose "0", the gate system will not
have gate lock function or reverse swing
operation.
If you choose "1", the gate system will
have gate lock function but no reverse
swing operation.
If you choose "2", the gate system will
have gate lock function and reverse
swing operation.
0~2
2
No need to adjust this if
the gate installed has
end stoppers.
C1
Electric lock.
0~1
1
When activated (Option
“1”), the gates can’t be
pushed open.
If you choose "0", the gate system will not
have gate lock operation after gate is
closed.
If you choose "1", the gate system will
have gate lock operation after gate is
closed.
C2
C3
Motor delay setting.
0~3
2
If you choose "0", only motor A working,
motor B do not working
If you choose "1", motor B will delay open
during opening.
If you choose "2", motor B will delay open
during opening, motor A will delay start
during closing.
If you choose "3", motor B and motor A will
start working at the same time.
