EN
EN.
7
5. After making sure AE1000 & Car
’
s ECU is actively
connected, disconnect the battery terminal from the old
battery and remove the old battery. The AE1000 will supply
power to maintain car
’
s ECU memory during this process.
Note: 1. Please don't let the battery terminal (+) (-) touch
any metal part of the car, or it could disrupt or damage
the circuits in the vehicle. 2. Please don't let the battery
terminal (+) (-) touch together, or it could disrupt or
damage the circuits in the vehicle.
6. Install a new (good) battery. After connecting the new
battery and connecting the battery terminals, you can stop
the power supply function by disconnecting AC Plug from
the wall socket.
Note: 1. Please don't let the battery terminal (+) (-) touch
any metal part of the car, or it could disrupt or damage
the circuits in the vehicle. 2. Please don't let the battery
terminal (+) (-) touch together, or it could disrupt or
damage the circuits in the vehicle.
To select your suitable charging setting, please refer to the following table:
LCD Indicator
Application
AGM SPIRAL, AGM FLATPLAT
batteries
SLI(Flooded), EFB, CAL/CAL, VRLA and
most of MF
batteries
GEL
batteries
OPERATION GUIDE
RISK OF
DAMAGE!
LFP(LiFePO4)
batteries
CAUTION: Please don’t select AGM/STD/
GEL to
charge
LFP battery. This may
cause batteries to burst,
resulting
in
damage or injury to person and
property.
Small battery
mode
Output: 1.5A for 12V
batteries
Use for smaller batteries. 2.3Ah to
30Ah
Large battery
mode
Output: 10A for 12V
batteries
Use for large batteries. 30Ah to
200Ah
