EN
EN.
8
RISK OF
DAMAGE!
Power supply function: 13.6V
–
10A
This function is used to keep vehicle-
computer’s memory
active
while the battery
is being changed or whenever the
battery
is disconnected from the vehicle’s
circuit.
CAUTION: IN THIS FUNCTION, THE
BATTERY CHARGER
IS
NOT
PROTECT-
ED
AGAINST POLARITYREVERSAL.
Voltage
display
The charging voltage will be shown on the
display
Low-temp function
It will start up once the ambient
temperature is lower than 10
濎
/ 50 ˚F
automatically.
CHARGING
INDICATION
Charging-error
function
Please refer to the troubleshooting
guide
below.
Incorrect battery
voltage.
Please refer to the troubleshooting
guide
below.
In case of faults, the LCD indicator will display the following
indications:
DISPLAY INDICATION PROBLEM
SOLUTIONS
Short circuit
Check for poor
connectionat
battery or clamps.
Battery
unrecoverable
after a complete
desulfation cycle.
It is a bad battery,
please replace it.
a) Battery capacity
excessive
Use a battery charger with
greater charging capacity.
b) It is a bad
battery which can’t
accept a charge.
It is a bad battery,
please replace it.
TROUBLESHOOTING
