EN
EN.
6
HOW
TO
CHARGE
:
1.At first, connect the charger to the wall socket. The
LCD
monitor shows the defaults of battery types/output
modes.
2.
Press the Mode/Type button to select the
charging
program.
AE1000E has 3 charging modes and 4 battery types.
(Both can be selected only if the device isn’t connected to the
battery)
3.Connect the clamps (+/-) to the battery for
charging
4.The error (Exclamation mark) icon will illuminate
or
flash if the battery clamps are incorrectly connected.
Also, the reverse polarity protection will ensure that the
battery or charger will not be damaged.
5.Stop charging at any time by disconnecting AC Plug
from
the wall socket.
1.Connect the charger/power supply to the wall socket.
The
LCD
monitor shows the defaults of battery types/
output
modes.
2. Press the Mode/Type button to select the Power
supply
program. Then it will count down automatically for 5
seconds.
3.
Connect AE1000 & Car
’
s ECU to an active
accessory outlet
or
clamping directly to the battery
terminal.
HOW TO REPLACE BATTERY USING THE
POWER SUPPLY FEATURE
4.
The error (ER5) icon will illuminate if the battery voltage is
too
low.
Please refer to the troubleshooting guide to solve the
problem.
