background image

EN

EN. 

2

      charger from the wall outlet. Use a slightly damp cloth to clean the

      housing and lead sets. Do not use solvents or soaps.

13. Place the power cords in a location where will not be stepped on,

tripped over, or subjected to stress or abuse of any kind.

14. Never attempt to charge a frozen battery. Allow the battery to

return to room temperature before connection. Suggested

operation range 0 C (32 F) to 50 C (122 F) in ambient temperature.

15. Never use this charger in or on any boat or watercraft directly. You

must remove the battery from the boat or watercraft and charge the

battery at the properly installed location of this charger.

16. It is not suggested to expose the charger to moisture and should

not be subjected to inclement weather.

17. WARNING – RISK OF EXPLOSIVE GASES

a) WORKING IN VICINITY OF A LEAD-ACID BATTERY IS

DANGEROUS. BATTERIES GENERATE EXPLOSIVE GAS

DURING NORMAL BATTERY OPERATION. FOR THIS

REASON, IT IS OF UTMOST IMPORTANCE THAT YOU

FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE

CHARGER.

b) To reduce risk of battery explosion, follow these instructions and

those published by battery manufacturer and manufacturer of any

equipment you intend to use in vicinity of battery.

18. RISK OF EXPLOSIVE GASES MIXTURE

a) Connect and disconnect battery leads only when the unit is not

on.

b) For a battery installed in a vehicle, first connect red clamp charger

output lead to the positive “+” battery post and then connect the

black clamp charger output lead to suitable ground away from

battery preferably the chassis; do not connect to carburetor or fuel

lines. Disconnect the black clamp charger output lead first.

c) Do not overcharge battery.

19. PERSONAL PRECAUTIONS

a) Someone should be within range of your voice or close enough to

come to your aid when you work near a lead acid battery.

b) Have plenty of fresh water and soap nearby in case battery acid

contacts skin, clothing or eyes.

c) Wear complete eye protection and protective clothing.

d) Avoid touching eyes while working near battery.

battery. It could spark or short-circuit the battery or other electrical

parts and could cause an explosion.

f) Remove personal metal items such as rings, bracelets, necklaces

and watches when working with a lead acid battery. It can produce

a short circuit current high enough to weld a ring or the like to

metal causing a severe burn.

g) This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

h) Children should be supervised to ensure that they do not play with

the appliance. 

Summary of Contents for AE1000E














Reviews: