Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Getting Started Download Page 114

Page: 114 / 130

108

Tutorial 4 — Advanced Exercises

Click Report.

The Employee Inventory report is generated, as shown in the following
illustration.

In the Employee Inventory window, on the toolbar, click the Print button.

In the Report Print Options dialog box, click Print to print the Employee
Inventory report.

Nice work! You have completed all of the tutorials offered in

Getting Started

Now, you can become more proficient with CAD, explore AutoSketch, and
use the program for your drawing needs.

To find out how to perform tasks not highlighted in these tutorials, or to
learn more conceptual information, see the AutoSketch Help system.

Summary of Contents for 003A1-121111-1001 - AutoSketch v.9.0



































































































































Search results

Summary of Contents for 003A1-121111-1001 - AutoSketch v.9.0

Reviews:

Related manuals for 003A1-121111-1001 - AutoSketch v.9.0

Brands by name

Popular brands

Autodesk 003A1-121111-1001 - AutoSketch v.9.0, Getting Started

Search results

Summary of Contents for 003A1-121111-1001 - AutoSketch v.9.0

Reviews:

Related manuals for 003A1-121111-1001 - AutoSketch v.9.0

Brands by name

Popular brands