12-2
SERVICE DETAILS
Sealing:
•
Check all door seals for cracking and
general condition.
•
Check correct closing to give a weather-
tight seal.
Childproof Lock:
•
Where a door is fitted with a childproof
lock check that an appropriate warning
notice is fixed adjacent to the door.
Appropriate warning notices are available
from motorhome manufacturers.
INTERNAL DOORS
Security:
•
Check that hinges and catches are
satisfactory and that, when latched, the
door is held securely shut.
Safety:
•
Check that any device fitted to hold a
door in the closed position can be
operated from both sides to open the
door in an emergency.
SECTION 4 - ATTACHMENTS TO
CHASSIS OR UNDERBODY
Corner Steadies
Check that attachments to chassis are
secure.
Ensure steadies work freely and
satisfactorily.
Lubricate screw to ensure correct operation.
Folding/Retractable Steps
Check that step pivots are satisfactory and
not worn. Check that, when closed, the
retaining mechanism holds the step securely.
If fitted, check device is working.
Underfloor Water Tank Mountings
Check mounting frames are secure to body.
Any fastenings that require releasing to
remove the tank should be free of rust and
operate freely. (Removal, flushing, cleaning
and replacing of tanks will be carried out at
the prior request of the customer or will be
done subsequently with other work).
Spare Wheel
Remove spare wheel. Check for damage.
Check typre pressure.
Check mounting frame for security to body
and for secure retention of spare wheel.
Wheel Boxes
Check for damage, corrosion, water
seepage, signs of tyre scrubbing.
SECTION 5 - ATTACHMENTS TO
BODY EXTERIOR
Roof Lights
Check security, general condition, and that
sealing has not deteriorated.
Roof Racks and Ladders
Check security to body and general
condition.
Check roof for damage adjacent to rack.
Mouldings, Trims
Check security. Check sealing has not
deteriorated.
Flue Terminals, Air Vents
Check security. Check sealing has not
deteriorated.
Check that these are not blocked.
SECTION 6 - INTERNAL
Body Seepage Check
Examine for moisture/water staining of areas
under windows, at side of roof and at
corners, which could indicate water seepage
problems. A moisture meter should be used
where appropriate.
Furniture
Check furniture is securely fixed.
Check door hinges, catches and stays for
satisfactory operation.
Dinette Seats/Beds
Check seat bases for security of fixings and
for damage.
Make up beds according to manufacturer’s
instructions and check for rigidity and safety.
Summary of Contents for Topaz
