Auto-Sleepers Topaz, Handbook

Page: 41 / 108

7-17
CONNECTION OF SERVICES
4 Control Panel Details
4.1 Layout and Buttons
The following diagram shows the control panel layout and button functions (EC50 control panel).
Note: to remove the decorative bezel, pull down and lift forward as indicated by the blue arrow.
4.2 Operation
This switch turns on (or off) the 12-volt power.
As the power is turned on the Leisure battery is automatically
selected and the LED display shows the battery voltage.
This switch turns on the power to the internal water pump ready
for use. It can be used to turn off the pump over night to avoid
any noise from the pump. When the switch is on, the LED will
show green.
This switch turns the Awning or Entry light on (or off). When the
switch is on the LED will show green.
This switch is used to select the Leisure battery and to display the
battery voltage level. Press once to select and display the
voltage. This display will turn off automatically after 5 seconds.
The LED next to the button will show that the battery has been
selected.
If the Leisure battery drops below 9V an alarm will trigger to warn
you that the battery is low. This alarm lasts for one minute and
then the power will be switched off to protect the battery.
This switch is used to select the Vehicle battery and to display the
battery voltage level. Press once to select and display the
voltage. This display will turn off automatically after 5 seconds.
The LED next to the button will show that the battery has been
selected.
If the Vehicle battery drops below 10.9V an alarm will trigger to
warn you that the battery is low. This alarm lasts for one minute
and then the battery selection will automatically switch over to the
Leisure battery to protect the vehicle battery.
Symbol Function Description
Main 12V Power
Switch
Water Pump power
switch
Auxiliary power
Switch
Select LEISURE
battery and display
battery voltage
Select VEHICLE
battery and display
battery voltage