8
1
2
BATTERY LOAD TEST
After the temperature selection or
after selecting
Battery Test
from
the menu enter the CCA rating:
For ease of adjustment the estimated CCA rating from the battery check
will appear unless you have set a default CCA rating in the SETUP
menu.
Press the (+Up) or (-Down) key
to increment or decrement to the
rated CCA of the battery.
Press (Y Enter) to continue test. If the Volts are below 7.2 you will get the
following.
If you answer ‘No” you will later
be asked if the battery has been
charged.
Surface charge removed if
detected.
Wait for test results.
You will be asked if the battery
has been charged if you are test-
ing a discharged battery.
SETUP
Select the temperature in Fahren-
heit or Centigrade.
Select the rating from JIS, DIN,
IEC, EN, CA, MCA, CCA or NONE. If
none is selected, each time a bat-
tery test is performed the unit will
prompt for the battery rating.
From the main menu select OTHER the ABOUT for the second menu.
>BATTERY TEST
STARTER TEST
ALTERNATOR TEST
OTHER
>ENTER RATED CCA
600
USE +/-.
‘Y’ TO CONTINUE
>IS THIS A 6V
BATTERY?
‘Y’ OR ‘N’
REMOVING SURFACE
CHARGE...
TESTING BATTERY
PLEASE WAIT…
>HAS BATTERY
BEEN CHARGED?
‘Y’ NO ‘N’
REVIEW/PRINT
VOLT METER
>SETUP
ABOUT
>SET TEMPERATURE
SCALE: F.
USE +/-.
‘Y’ TO SELECT
>DEFAULT BATTERY
RATING: CCA
USE +/-.
‘Y’ TO SELECT
