Auto Meter BVA-200s Operator'S Manual Download Page 2

2

23

CONGRATULATIONS! 

You have purchased one of Auto Meter's hand-held Charging System 
Analyzers.  It is designed to test each component of a vehicle's electrical 
system with greater speed and accuracy.  If you should have any 
questions about your tester, testing procedures, or service see page 24 
for contact information. 

BVA 200s

Load Test Capacity..................120 Amp
Battery sizes ...........................200-1600 CCA
Digital Back-Lit Display  ..........1" x 2.5" - 4 line x 16 character
Volt Ranges .............................Digital 0-30
Cooling ....................................Vented
Leads ......................................Load Amp-2 1/2 ft., 6 Gauge
Size .........................................5 7/8" x 9 1/2" x 1 7/8"
Memory ...................................stores the last 200 tests
Internal Battery ........................9 Volt Alkaline

Optional

 AC-15 ........................Infrared printer and carrying case

Optional 

AC-24J

 ......................

BVA-200s Carrying case only

Optional 

AC-12  ......................PC Interface adapter cord

Weight .....................................4 lbs.  

What to Expect from the BVA-200s:  

Immediately recognize a bad battery and perform a complete 
charging system analysis

.

  The BVA-200s is a portable full-featured 

menu-driven battery tester and charging system analyzer that provides 
quick, professional load results using Auto Meter's Pulsed Differential 
Load.  Quick battery checks will increase charging productivity.  The 
BVA-200s is user friendly.  It tells you what to do.  The stator-diode test 
automatically indicates open or shorted stator-diodes.  It is professionally 
accurate.  Detailed test results are LCD displayed after each test or can 
be reviewed and/or printed from memory.  

Caution: 

The BVA-200s grill may get hot after repeated use.  Be sure to 

hold the unit from the side grips only.  Keep hands away from the grill. 

LIMITED WARRANTY 

12 MONTHS FROM DATE OF PURCHASE-
CABLES 90 DAYS

The manufacturer warrants to the consumer that this product 
will be free from defects in material or workmanship for 
a period of twelve (12) months from the date of original 
purchase.  
Products that fail within this 12 month warranty period will 
be repaired or replaced at the manufacturer's option to the 
consumer, when determined by the manufacturer that the 
product failed due to defects in material or workmanship.  This 
warranty is limited to the repair or replacement of parts and 
the necessary labor by the manufacturer to effect the repair or 
replacement of the product.  In no event shall the manufacturer 
be responsible for special, incidental or consequential damages 
or costs incurred due to the failure of this product.  

Improper use, accident, water damage, abuse, unauthorized 
repairs or alterations voids this warranty.  The manufacturer 
disclaims any liability or consequential damages due to breach 
of any written or implied warranty on its test equipment.  

WARRANTY AND SERVICE INFORMATION

Warranty claims to the manufacturer's service department 
must be transportation prepaid and accompanied with dated 
proof of purchase.  This warranty applies only to the original 
purchaser and is non-transferable.  Shipper damage incurred 
during return shipments is not covered under this warranty.  It 
is the responsibility of the shipper (the customer returning the 
Test Equipment) to package the tester properly to prevent any 
damage during return shipment.  Repair costs for such damages 
will be charged back to shipper (customer returning the Test 
Equipment).  Protect the product By shipping in original carton 
or add plenty of over-pack cushioning such as crumpled up 
newspaper.  

Summary of Contents for BVA-200s













Reviews: