•
•
•
•
•
•
The warranty period is calculated from the date of purchase by the end user and covers
cost for replacement parts / equipment and warranty labor per-formed. A copy of the
original purchase receipt or gift receipt from the original retailer must also accompany
the war-ranty claim. To locate the nearest authorized Autlead service center, please
visit our website at www.autlead.com.
Autlead's obligation under this warranty shall strictly be limited, at Autlead's option,
either to replace or repair, through Autlead direct or through an Authorized Autlead
Service Dealer without charge during the warranty period any part, which in the opinion
of the manufacturer, shows defect in workmanship or material. Service will be sched-
uled according to the normal work flow and business hours at the service center, and
availability of replacement parts. All decisions of Autlead with regard to this limited
warranty shall be final.
This warranty does not cover:
•
•
1. Spray Gun
2. Pressure Hose
3. Fuel Tank
4. Engine Switch
5. Chemical Injector
6. Pump Outlet
7. Thermal Relieve Valve
8. Nozzles
If the symptom you are experiencing is not listed above, or if the provided solutions do
not solve your issue,please visit our extensive online troubleshooting database at:
www.autlead.com
High Pressure Washers
Limited 24 month warranty
Cold water gasoline pressure washers
This Autlead product is warranted by Autlead to be free of defects in workmanship and
materials under normal use.
Specific warranty applies to:
Symptom
Output
Pressure
Varies Between
High And Low
No Detergent
Garden Hose
Connection
Leaks
Loose fittings.
Missing/worn
rubber washer.
Pump is sucking air.
Detergent suction
tube not properly
connected to the
machine.
Detergent is too
thick.
Filter on detergent
suction tube is
clogged.
Damaged or
clogged detergent
suction tube.
A high pressure
nozzle is attached.
Spray nozzle is
obstructed.
Check connection.
Dilute detergent, for best results use
Kärcher detergent.
Run warm water through filter to remove
debris.
Remove obstruction or replace detergent
suction tube.
Replace with black detergent nozzle.
Blow out or remove debris with fine
needle.
Tighten fittings.
Insert new washer.
Water inlet filter is
clogged.
Spray nozzle is
obstructed.
Calcified gun, hose
or spray wand.
Check that hoses and fittings are air
tight. Turn off machine and purge pump
by squeezing trigger gun until a steady
flow of water emerges through the
nozzle
Remove filter and rinse out in warm
water.
Blow out or remove debris with a fine
needle.
Run distilled vinegar through detergent
tank.
Cause
Solution
15
English
