AUTHOR Alarm TOR, Operating Manual

Page: 8 / 12

8
4. There will be 2 IGLA indication signals and
afterwards the signalling shall stop*. After that you
can turn off the ignition and disconnect the grey
wire from power supply «+». Modules are connected.
Follow these steps to test the correct operation of TOR
module:
1. Turn off the ignition.
2. Activate the standard alarm system.
3. Deactivate the security system.
4. Disconnect the power supply form IGLA system.
5. Start the ignition and attempt to drive.
If TOR module locks the engine, the module operation
is correct. Otherwise repeat the procedure of IGLA and
TOR connection.
* Depending on the firmware of the device, it is possible the signalling continues
until the ignition is off.