AUTHOR Alarm RAPTOR 151, Operating Manual

Page: 5 / 24

5
OPERATION CONCEPT
Security deactivation
In order to start driving you should log into the system
via one of the following ways:
• use the key fob;
• enter the Emergency code specified under the
protection layer of the plastic card.
If the key fob is detected (Emergency code is entered
correctly), the system will signal with indication, the
engine will not be locked and you can start driving. If
the key fob was not detected (Emergency code incorrect
or was not entered at all), RAPTOR will lock the engine.
In some car models the system switches to the engine
start inhibit mode after the engine is shut off. In order
to unlock the engine you should switch on the ignition
without starting the engine (without pressing the brake
pedal), enter Emergency code and start the engine.
The locking method (engine start inhibit and/or running
engine stall) depends of the RAPTOR system settings
and the car brand/model.
The security system is activated in 10 seconds after the
ignition is off.