AUTHOR Alarm RAPTOR 151, Operating Manual

Page: 13 / 24

13
2. Press the accelerator pedal as far as it can go 23
times. When you press the accelerator last time keep
it pressed until the confirmation signals will appear.
The indication signals will confirm the action. The
system will be in the Firmware update mode.
ATTENTION! This opportunity is not supported by all
types of firmware and car models. Learn more about
versions suitable for firmware update mode on our
website.
Adding or deleting Key fobs
In order to add the new Key fob do the following:
1. Make sure the key fob can be used for connection
with the device:
• insert the battery in the new key fob;
• make sure the LED is flashing with green.
2. Take out the batteries from all key fobs including
those connected to the system.
3. Delete all key fobs from the system memory. Follow
the steps described on page 11:
• Switch ON the ignition without starting the
engine;
• Press the accelerator* as far as it can go 25
times (when you press for the last time keep the
accelerator press until the confirmation signals
will appear);
• Release the accelerator pedal.
* For some car models other controls are used instead of accelerator pedal (see
the annex).