AUTHOR Alarm RAPTOR 151, Operating Manual

Page: 11 / 24

11
REFERENCE INFORMATION
Options of the anti-theft system RAPTOR
The state of option set in the system by default («Switch
ON», «Switch OFF») is marked with grey color in the table.
The figures in the table show how many times the service
button shall be pressed to choose a particular option state.
Option Switch ON Switch OFF
Service mode
5
4 or emergency code
Engine start inhibit*
18 19
Firmware update
23 -
Adding and deleting
key fobs
25 -
* Initial status of an option depends on car brand/model (see the section
System compatibility on the web-site author-alarm.com). When this
option is switched OFF the RAPTOR system stalls the running engine
via the CAN-bus or additional circuit (depending on RAPTOR system
installation and contents of the set).
In order to change the option state
do the following:
1. Switch ON the ignition without starting the engine,
then enter the Emergency code for authorization (or
use the key fob).
2. Press the accelerator as far as it can go* the number
of times needed to reach the particular state –
«Switch ON» or «Switch OFF» (see the figures in the
corresponding column in the table). For example, 18
times to switch ON the Engine start inhibit mode
or press 19 times to switch it OFF. When you press
the accelerator last time keep it pressed until the
confirmation signals will appear. The option state
will be changed.