AUTHOR Alarm RAPTOR 151, Operating Manual

Page: 10 / 24

10
Device number check
This check is necessary to confirm the connection
between the plastic card with Emergency code and the
installed device. If the open code card number does not
match with the device, the Emergency code can not be
used to unlock the system.
It is recommended to do this check right after you get
the car with the installed anti-theft system RAPTOR
from the service centre.
1.
Switch ON the ignition without starting the engine.
2. Press the pedal brake and while keeping it pressed
press the accelerator* pedal as far as it can go the
number of times where the number is equal to the
first digit in the open card number (indicated on the
plastic card). Release the brake pedal. The first digit
of the open code will be entered.
3. Input all of the rest digits in the same way (see item 2).
If the code number is correct, the system will signal
with 2 flashes. If nothing happens, that means the code
number was entered incorrectly or it does not match
with the device number.
* For some car models other controls are used instead of an accelerator pedal
(see the annex).