Authonet Firewall F-10 Product Overview & Operation Manual Download

Page: 51 / 51

Differences between the Authonet F1 and F10 firewalls

The Authonet F1 firewall is a basic low cost model with limited performance. This product is
suitable for businesses with 10 or less employees.

The Authonet F10 firewall is an economical model with medium range performance. This product
is suitable for businesses with 25 or less employees.

Authonet will release a higher performance firewall product during 2019 for businesses with up to
100 employees.

Online Support

Online support is available for any question that the customer may have regarding Authonet
firewalls. To send a question, go to the Authonet support page

https://www.authonet.com/support.php

Provide the following information:



Model number:



Firmware version:



Serial number:



Your name:



Your email address:



Explain the information that you need, or the problem you are having:

Support is provided Weekdays 9am-5PM (GMT)

Summary of Contents for Firewall F-10



















































Search results

Summary of Contents for Firewall F-10

Reviews:

Related manuals for Firewall F-10

Brands by name

Popular brands

Authonet Firewall F-10, Product Overview & Operation Manual

Search results

Summary of Contents for Firewall F-10

Reviews:

Related manuals for Firewall F-10

Brands by name

Popular brands