7
Item
Description
Protocols
ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line,
Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM,
CAN
ISO
11898,
Highspeed,
Middlespeed,
Lowspeed and Singlewire CAN, GM UART, UART
Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0,
TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN
VCI
– Wireless Diagnostic Interface
Functional Description
Figure 2-5
Wireless Diagnostic Interface
– for MaxiSys MS908S
1. Vehicle Data Connector (DB15-Pin)
2. Power LED
– lights solid green when the device is powered on.
3. Vehicle LED
– blinks green when the device is communicating with the vehicle’s
network.
4. Error LED
– lights solid red when serious hardware failure occurs; also blinks red
when the device is updating software/firmware.
5. BT LED
– lights solid green when the device is connected with the tablet through
BT communication.
6. USB LED
– lights solid green when the device is properly connected and
communicating with the tablet via the USB cable.
7. USB Port
Communication
The Wireless Diagnostic Interface supports both BT and USB communication. It can
transmit vehicle data to the tablet with or without a physical connection. The working
range of the transmitter through BT communication is about 755 feet (about 230 m). A
