51
2.
Tap the right column of the channel control button to open the settings dialog
box.
Figure 1-48
Sample Activate Channel Screen
3.
Tap the left column of channel control button again to close the channel. The
closed channel button displays gray.
Channel Color
Identify each channel waveform by color.
Table 1-5
Channel Color Table
Input Channel
Color
A
Red
B
Green
C
Blue
D
Yellow
The amplitude, probe, low-pass filtering and DLC channel settings can be
configured in the Channel control dialog box.
Amplitude Settings
The amplitude settings allow you to set up the oscilloscope to capture signals with
the specified range. If the input signal exceeds the selected range, an over-range
