146
Figure 1-10
Sample Indicator Mode Screen
Main View Section
The
CAN-High
line is assigned to
Pin 6
and the
CAN-Low
line is assigned to
Pin 14
of
the OBDII adapter by default according to the
CAN-Bus
standard protocol.
If the test vehicle’s actual communication signal pins are assigned differently, you can
select OBDII connector’s signal pins manually in the
When the electronic control units send out signals properly, the left and right indicator
lights will flash consecutively on the screen.
NOTE
The flashing indicator lights serve to confirm only that communication signals have
been detected.
Lower Buttons
Protocol Button
In the left lower corner of the screen, you can select the protocol you want to test.
