background image

 

Trademarks

 

Autel

®

, MaxiSys

®

, MaxiDAS

®

, MaxiScan

®

, MaxiCheck

®

, and MaxiRecorder

®

 are trademarks of Autel 

Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other 

marks are trademarks or registered trademarks of their respective holders. 

Copyright Information 

No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or 

by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written 

permission of Autel. 

Disclaimer of Warranties and Limitation of Liabilities

 

All  information,  specifications  and  illustrations  in  this  manual  are  based  on  the  latest  information 

available at the time of printing. 

Autel reserves the right to make changes at any time without notice. While information of this manual 

has been carefully checked for accuracy, no guarantee is given for the completeness and correctness 

of the contents, including but not limited to the product specifications, functions, and illustrations. 

Autel  will  not  be  liable  for  any  direct,  special,  incidental,  indirect  damages  or  any  economic 

consequential damages (including the loss of profits). 

IMPORTANT 

Before operating or maintaining this unit, please read this manual carefully, paying extra attention to 

the safety warnings and precautions. 

For Services and Support 

pro.autel.com

 

www.autel.com

 

1-855-288-3587/1-855-AUTELUS (North America) 

0086-755-86147779 (China) 

[email protected] 

For technical assistance in all other markets, please contact your local selling agent. 

 

Summary of Contents for MaxiBAS B200
















Reviews: