AUTEC - Air series
Docking station AIRDOCK01
7
LIAIREA0-01
2.2 Positioning
Put the docking station in a indoor and dry place, far from liquids, dust and
heat sources.
Do not put any objects over the docking station when it is powered.
Do not in any case perforate, modify or tamper with the docking station.
2.3 Warnings for docking station usage
Users of the docking station must respect the following behaviour rules and provisions.
This equipment is not suitable for people (including children) with reduced
physical, sensory or mental capabilities.
This equipment is for professional use only, and cannot be used by unskilled
people, unless they are supervised and have received instructions on the
use of this device by a person in charge for their safety.
Do not handle the docking station and/or the mains adapter with soaked or
wet hands or feet or using objects, tools and/or instruments that conduct
electricity, are not insulated or are not protected from the risk of electrical
shock; do not in any case use damaged or wet objects and/or tools.
Disconnect power supply, disconnect the jack plug and remove the unit (if
present) before any cleaning or maintenance operation.
Before you put the unit in the docking station's cradle, check that the contacts
of both are intact and clean. If necessary, clean them with a non-abrasive
cloth or brush and a generic electrical contact cleaner.
improper use of docking stations and power supply units may pose the
hazard of fire, explosion, overheating or other hazards.
To recharge the battery, make sure that the machine is in a safe state, so
that it cannot generate hazards (i.e. never leave the load suspended). When
the A8 unit is being recharged in the docking station, the unit must not be
used to control the machine, and the stop function is not available.
