Auta COMPACT VISUALTECH, Manual

Page: 23 / 28

VISUALTECH SWITCHBOARD
User Guide
auta
► Queue
Settings
Configuration
Main Menu
 Navigate OK Accept

Exit

3. Menus
In the stand by mode, if any of the keys

, OK or

is pressed, the screen will
display the menu shown in Figure 5. Any option can be selected making use of the
vertical arrows

,

and the OK button
3
.
Figure 5. Main menu of the SB
3.1. Queue:

The Queue menu can also be reached directly from the Stand by mode pressing the
up key

of the navigator.

This menu allows to navigate through the registers of the queue, and to perform a
call to any of them, and pressing the
OK button. In Figure 6 there is an example.

The registers in the Queue will remain stored in the database unless the Erase key
(

) is pressed inside this menu, or the call is returned to the corresponding tenant.

The maximum size of the Queue is 25 registers. If more than 25 calls are stored in
the Queue , the newest calls will replace the oldest.

If there isn’t any call stored, the system will display the message Empty Queue.
3
At the bottom of the screen there is always information about the different actions the user can execute.
22