Vetec SPM24
ENGLISH
6
BLUSPM24
4.
Description of signs and symbols
5.
General indications
L
Danger:
Th is indicates a warning; lack of observance may lead to injury or death.
P
Paragraphs:
Product safety information.
A
Caution/Important:
Th is indicates a warning; not following this warning may lead to da-
mage of the equipment or materials.
M
Operation and maintenance:
Advice and indications in order to maintain the product´s
value.
N
Information:
Useful information for the correct usage of this product.
Wear goggles
Read the instruc-
tion manual before
usage
L
Th e manufacturer is not responsible for damage to persons or property caused by non-
observance of the instructions.
Th is device must be used exclusively for its intended use. Th is product may be used only
by personnel who have received training.
Th e instruction manual must be carried with the machine for its entire life period.
Th e user is required to:
• make the instruction manual available to operators
• ensure that the operator has read and understood the instructions
P
For all legal intents and purposes this instruction manual is valid.
Caution!
Danger of squee-
zing
6.
Application and use not in conformity with the intended purpose
Th e electro-hydraulic press tool BLUSPM24 is exclusively used for the production of a perma-
nent connection between tubes and press fi ttings in all usual types of material, such as PE-X-,
miltilayer composite and metal systems. Th e tool is only suitable for manual operation and af-
ter a series of approx. 40-50 press cycles, it must be allowed to cool down for about 10 minu-
tes. See table on page 10 for the corresponding range of application Th e hydraulic powered
compression tool may be used exclusively in environments with illumination of at least 400
lux, or in daylight.
SPM24
The electro-hydraulic press tool SPM24 is exclusively used for the production of a permanent
connection between tubes and press fittings in all usual types of material, such as PE-X-,
multilayer composite and metal systems. The tool is only suitable for manual operation
and after a series of approx. 40-50 press cycles, it must be allowed to cool down for about
10 minutes. See table on page 10 for the corresponding range of application. The hydraulic
powered compression tool may be used exclusively in environments with illumination of at
least 400 lux, or in daylight.
