AC
-R2-001
Page 9
MAINTENANCE
Do not touch hot surfaces. Do not attempt any cleaning or maintenance within 30 minutes of the appliance
being used. Periodic maintenance should be performed at intervals not exceeding 6 months or when evident
such as with flame abnormality or burner discolouration. Flame abnormality or burner discolouration is
generally a sign of gas supply restriction or blocked burner ports.
The pilot provides a flame to light the main burner. If the pilot is blocked by debris, spider webs, etc., the
pilot flame may be too small resulting in erratic ignition of the main burner. If this occurs, it will be necessary
to clean the pilot with compressed air. It is recommended that an authorised person perform all maintenance.
If the appliance fails to operate normally, contact the place of purchase, or their authorised agent for advice
and service.
DO NOT ATTEMPT REPAIRS YOURSELF.
It is also recommended that the hose assembly and regulator inlet fitting seals be checked for damage,
abrasion, cracking or displacement before each use. PVC hose assemblies may harden with age and should
be replaced if this occurs. If a replacement part or assembly is required please contact place of purchase or
authorized service agent for advice.
TROUBLESHOOTING . DO NOT MODIFY THIS APPLIANCE.
If the appliance cannot be adjusted to perform correctly contact after sales service contact
details this page.
Problem
Possible Cause
Solution
No Ignition
Main Gas Valve is not
turned on.
Air trapped in the gas
hose.
The safety valve is not
open.
Turn off the gas valve once and then turn it on fully.
Repeat the ignition process until all air in the hose is
purged completely.
Follow the procedures from 1 to 6 in the section of
“
Ignite
the burner
”.
Gas Leaking
Failure of the gas valve.
Contact your dealer for a service/repair.
DO NOT ATTEMPT TO REPAIR IT YOURSELF.
Incomplete
Combustion
(Yellow Flame)
Injector is clogged.
Clean the injector.
SPECIFICATIONS
Product Name
18 Jet Duckbill Burner Cooker
28 Jet Duckbill Burner Cooker
Model No.
Y018LPWF-S
Y018NGWF-S
Y028LPWF-S
Y028NGWF-S
Gas Type
LP
Natural
LP
Natural
Gas Pressure
2.75kPa
0.90kPa
2.75kPa
0.90kPa
Injector Size
Ø0.58mm
Ø0.98mm
Ø0.58mm
Ø0.98mm
Gas Consumption
1.34kg/hr
1.76m³/hr
2.08kg/hr
2.74m³/hr
Inlet Fitting
CGA-510 POL
with Soft Nose
½” BSPF
CGA-510 POL
with Soft Nose
½” BSPF
Heat Capacity
73MJ/hr
104MJ/hr
Dimensions
W55cm x D56cm x H44.5-49.5cm
W68cm x D70cm x H52-57cm
Pot Size (Min/Max)
Ø44cm/Ø49cm
Ø44cm/Ø61cm
Approval No.:
IAPMO Gas Mark GMK10005
Summary of Contents for Y018LPWF-S
Page 11: ...AC R2 001 Page 11 ...
