AUSA CH 200, Operator'S Manual

Page: 22 / 51

22
CH 200 / CH 250
Safety
(fig. 4)
(fig. 3)
(fig. 2)
(fig. 1)
Before starting the engine
·
Wear protective clothing which is suitable and will protect you in the working environment. This
may include a helmet, ear plugs, protective goggles or reflective clothing (fig.2). Do not wear
loose clothing or jewellery or long air as these could become entangled in the controls, in moving
parts or edges of the machine and prove dangerous.
·
If working in an enclosed area make certain there is sufficient ventilation to prevent excessive
build-up of exhaust fumes. Under this conditions always stop this engine when not in use.
·
Highway use of this off-road equipment may be restricted or prohibited by the laws of a State
or Province.
·
Before starting the forklift be certain to check or test the following items:(fig.3)
- Check for any leaks in the fuel, hydraulic or cooling systems.
- Clean any oil or fuel leaks that may exist on the forklift controls or operating area.
- Check tire conditions and pressures.
- Retight wheel nuts if necessary.
- Check that all controls are working correctly.
- Check the operator seat’s safety belt and its attachments.
- Check brake pedal travel and effectiveness.
- Check the following fluid levels:
Fuel - Braking fluid - Hydraulic fluid - Cooling system fluid - Engine oil
- Check horn.
- Check lighting and signaling systems.
·
Jumping on or off the forklift can cause serious injury. Always face the machine and use rails
and steps to slowly get on and slowly get off the forklift.(Fig.4)
·
Adjust seat position so you are comfortable and can easily reach all the controls. Now fasten
your seat belt.
·
Always stop the engine and do not smoke when fuelling the machine.
WARNING
Do not operate this machine unless you have read and understand the
safety and operational instructions contained in this Operators Manual and
have been instructed and trained in the safe operation of this
Forklift. REMEMBER THAT “YOU” ARE THE KEY TO SAFETY.(Fig.1)