
12
USERS GUIDE
www.auroramm.com
Panel Layout
ID
Name
Description
1
USB 2.0
USB port is for updating via plugging USB disk
with firmware
2
LEDs
To indicate the signal available and power on/off
3
Buttons
To switch the input signal and power on/off
USB Port
The USB port is used to update the software of the TS-100.
You may pair the TS-100 and the key fob by plugging in the key fob.
The USB port is used for creating or updating the launcher by clicking
Download
button when a USB
stick is plugged in.
You may connect a mouse to the USB port to access the
settings
, select the
HDMI
input, open the
help
page and choose the
source
device.
POWER Button
The button at the front of the base unit has a power on/off function once the base unit is powered.
When the system is powered on, pushing the power button makes the system shut down and power off.
When the system is powered off, pushing the power button makes the system start up.
Push the power button to enter standby mode.
Push the power button to wake up the base unit.