AURES YUNO II, User Manual

Page: 29 / 41

YUNO-II user manual v1.1
25
Status Command
You can send below command sequence to COM to read drawer status.
Read Drawer Status
Read Status 0x1D 0x72 0x02
You can read drawer status after “ Read Drawer Status ” command.
Drawer Status 0x01 Drawer Opened
0x00 Drawer Closed
ASB Command (Automatic Status Back)
If ASB mode is activated, the PUH will report status if drawer status has changed.
You can use command to enable or disable this function.
The ASB is disabled by default when PUH power on. You need to enable ASB after
each time power on.
Enable ASB function
Enable ASB 0x1D 0x61 0x01
Disable ASB function
Enable ASB 0x1D 0x61 0x00
ASB Message - Status Report
The ASB message are always 4 bytes with some fixed bits which can be used to
identify the message as an ASB message. Bit 2 of the first byte signals the
drawer state.
Drawer Opened 0x10 0x00 0x00 0x0F
Drawer Closed 0x14 0x00 0x00 0x0F