YUNO-II user manual v1.1
23
Read FW Command
You can send below command sequence to get MCU FW version
Read FW Version
0x1D
0x41
0x30
Y
ou can read FW version after “
Read FW
” command. The FW
version is a ASCII
string.
Open Command
You can send below command sequence to COM port to open drawer.
Drawer 1 Kick Out
0x1B
0x70
0x00
T1
T2
Drawer 2 Kick Out
0x1B
0x70
0x01
T1
T2
T1 / T2 : Drawer kick on time is set to T1 x 2 ms, off time is set to T2 x 2 ms.
The best value for T1/T2 is 7D(125 * 2ms = 250ms)
Note : CDA CD port need to charge power after each time open drawer. The
charge time about 600ms, please wait 600ms at least between two open
drawer command.
Summary of Contents for YUNO II
