RTX-24EM
User guide
The technical characteristics can change without notice. AUR°EL S.p.A doesn’t assume the responsibility to the damages caused by an improper use of the device.
AUR°EL S.p.A.
Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY 12/11/2019 - Rev. B
Tel.: +390546941124 – Fax: +390546941660 Page 16
http://www.aurel.it
Read_RXFIFO_Size
This command reads the total number of bytes currently available in the RXFIFO.
Read_TXFIFO_Size
This command reads the total number of bytes currently available in the TXFIFO.
Read_RAM1
This command reads the 12 bits word from the specified address (6bits) of RAM1. This command will put
the microcontroller on hold and reset state, until last bit has been processed.
Write_RAM1
This command writes a 12 bits word to the specified address (6 bits) of RAM1. This command will put the
microcontroller on hold and reset state until last bit has been processed.
Read_RAM2
This command reads the 12 bits word to the specific address (4 bits) of RAM2. This command will put the
microcontroller on hold until last bit has been processed.
Write_RAM2
This command writes a 12 bits word to the specified address (4 bits) of RAM2. This command will put the
microcontroller on hold until last bit has been processed.
