background image

Intelligent wireless controller of 8 heating zones

AURATON 8000

AURATON  8000

AURATON 8000

  is  an  advanced,  intelligent  wireless  digital  controller  designed  for 

controlling 8 heating zones. 

  has voltage outputs for controlling thermo-electric valves, voltage outputs 

for controlling hot water circulation pump and central heating pump and a potential-free 
output that may be used for controlling central heating furnace.

AURATON  8000

  communicates  with  wireless  transmitters  using  modern  transmission 

protocol LMS.

Description of 

 

AURATON 8000

Button of hot water

circulation pump

Multi-functional controller
        - left, right
        - up, down
        - OK button

OK

LCD display

ON/OFF 

button

Button 

cover

Buttons of 

heating zones

1–8

LED signalling 
ON/OFF status

LED signalling operation  

of the circulation pump

LEDs signalling  

operation of heating zones 

1–8

(sold separately)

AURATON 8000 

controller may operate with the following products:

ź

  Wireless  temperature  regulators  operating  in  LMS  (Logic 

Management  System) 

AURATON  2025  RTH,  AURATON  2030  RTH, 

AURATON 200, AURATON T-1.

AURATON 8000 may simultaneously operate with 8 controllers (one 

controller in each zone).

ź

ź

AURATON Te230  

thermo-electric regulators .

ź

Maximum 6 AURATON regulators for each zone .

ź

AURATON H-1 

window handle.

ź

ź

ź

A  window  handle  with  a  position  sensor  and  transmitter  is  an 

optional part of the system. It provides information about the window 
position to the controller. The handle recognizes 4 window positions: 
open, closed, pivoted and trickle vent position (micro ventilation).

The  handle  transmits  information  to  AURATON  8000  controller, 

which activates the relay, e.g. switching off a heater after opening the 
window or reducing temperature by 3°C when the window is pivoted, 
in order to save energy.

AURATON 8000

 may operate up to 6 handles in one zone.

ź

AURATON T-2 

 wireless thermometer.

ź

Optional  element  of  the  system,  enabling  the  user  to  control 

temperature  in  a  room  other  than  the  room,  where  the  wireless 
controller is installed.

3

2

Optional elements of the system to 
cooperate with AURATON 8000 

AURATON T

-2

Summary of Contents for AURATON 8000

















Reviews: