auna tavo next, Manual

Page: 8 / 102

Product Set Up
Open Stroller
1
- Open the storage latch as shown. (1)
2
- Rotate the handle to the rear of the stroller. A “click”
sound means the stroller frame is open completely.
Check that the stroller is completely latched open before
continuing. (2)
Front Wheels
1
- Insert the front wheel into the front leg. A “click” sound
means the wheel is assembled completely. (3)
Check the wheel is securely attached by pulling out.Repeat
on opposite side.
2
- To remove the front wheel, slide the release button out
(4)-1 and then detach the front wheel from the front leg
(4)-2 .
Rear Wheels
1
- Insert the rear wheel into the rear leg. A “click” sound
means the rear wheel is assembled completely. Repeat
on opposite side. (5)
Check that the wheels are securely attached by pulling on
them.
2
- To remove the rear wheel, press the release button (6)-1
and detach the rear wheel from the rear leg (6)-2 .
Canopy
1
- Slide the canopy mounts onto the stroller. (7)
2
- Zip the canopy fabric to the back of the stroller seat.
(8)
Arm Bar
Always secure the child with the harness. The arm bar is
not a restraint device.
1
- Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. A “click” sound means the
arm bar is assembled completely. (9)
2
- To remove the arm bar, press the arm bar release buttons
(10)-1 , and lift the arm bar up. (10)-2
Check Set Up
Stroller frame is latched open
Rear and front wheels securely attached
Canopy mount attached to stroller frame and canopy
zipped to seat pad
Basket securely attached
Arm bar securely attached
11 TAVO next instructions 12 TAVO next instructions
EN EN