22
Assembly Instruction
FTA 600
Cable on the casement
Connection cable routing on the casement:
• Cable must be protected against damage (shearing-off, kinking,
splitting), i.e. by using bushings.
Cable on the frame
Connection cable routing on the frame or transom:
• Cable must be protected against damage (shearing-off, kinking,
splitting), i.e. by using bushings.
Upon removal of the glazing bead is the dan-
ger that the glass may fall.
!
Cable routing on or in the casement
RA
RA
FL
BD
BD
AK
FL
Cable crossover without
protective cable hose
Cable crossover with
protective cable hose
Connection cable routing on the hinge side:
• Make sure that during opening or closing procedure the cable will
not be damaged by shearing-off, kinking, crushing.
• Protect cable feedthrough in profi le e.g. by using cable bushings,
cable transitions.
C
ABLE
R
OUTING
C
ABLE
ROUTING
ON
THE
CASEMENT
OR
FRAME
I
NSTALLATION
STEP
5:
07
06
FTA600
Cable routing on the frame
cable duct glued on
(in addition secured with countersunk
screws against breaking away)
cable duct glued on
(in addition secured with
countersunk screws
against breaking away)
AK
RA
protective cable
hose
