4.
Transport and storage
4.1.
Transport
For transport to place of installation, use sturdy packaging.
Suspended load!
Death or serious injury.
→
Do NOT stand below suspended load.
→
Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.
→
Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.
→
Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.
→
Respect total weight of combination (actuator, gearbox, valve)
→
Secure load against falling down, sliding or tilting.
→
Perform lift trial at low height to eliminate any potential danger e.g. by tilting.
Suspension with vertical hollow shaft
Figure 6: Examples left TR-M30X, right TR-M500X
[1]
Suspension for sizes 30/60/120
[2]
Suspension for sizes 250/500/1000
Depending on the size, slight manual support of controls is required to place the
actuator to the desired vertical position.
12
TR-M30X – TR-M1000X
Transport and storage
TR-MR30X – TR-MR1000X
