AUMA SVM 05.1, Operating Instructions Manual

Page: 2 / 56

Read operation instructions first.
● Observe safety instructions.
● These operation instructions are part of the product.
● Retain operation instructions during product life.
● Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
4 1. Safety instructions.................................................................................................................
4 1.1. Basic information on safety
4 1.2. Range of application
5 1.3. Warnings and notes
5 1.4. References and symbols
7 2. Identification...........................................................................................................................
7 2.1. Name plate
8 2.2. Short description
9 3. Transport, storage and packaging........................................................................................
9 3.1. Transport
9 3.2. Storage
9 3.3. Packaging
10 4. Assembly................................................................................................................................
10 4.1. Mounting position
10 4.2. Actuator: mount to valve
10 4.2.1. Actuator for assembly: prepare
10 4.2.2. Output drive for coupling
11 4.2.2.1. Mounting with coupling
13 5. Electrical connection.............................................................................................................
13 5.1. Basic information
15 5.2. Connection via bayonet connector
15 5.2.1. Mains and fieldbus cables: connect
17 5.3. Earth connection, external
18 5.4. Accessories for electrical connection
18 5.4.1. Local controls mounted on wall bracket
19 6. Indications..............................................................................................................................
19 6.1. Mechanical position indication via indicator mark
19 6.2. Indication lights
21 7. Signals (output signals).........................................................................................................
21 7.1. Signals via fieldbus
2
SVM 05.1 – SVM 07.5 / SVMR 05.1 – SVMR 07.5
Table of contents Modbus RTU