4.
Assembly
4.1.
Notes for installation
SIMA² is available in the following variants: Standard housing for 19” rack mounting,
as bench device, for wall mounting or top-hat rail mounting (on request).
When used as bench device, the standard housing can be equipped with stands
elevating the SIMA² housing.
Information
When installing or setting up, the following must be heeded:
●
Housing, components and mains connector require sufficient space.
●
Housing and components require sufficient ventilation.
●
Doors of standard housing require space for swinging open.
●
Optional handles increase space requirements at the front.
4.2.
Dimensions
The following drawings indicate the dimensions of the various SIMA² variants.
Information
The illustrations show an example of SIMA² in version “hot standby system redund-
ancy in one joint housing”.
Standard housing
Figure 7: SIMA² standard housing, top view with open doors
Table 3:
Legend
444.8 mm
[1]
340 mm
[2]
19.1 mm
[3]
172 mm
[4]
35°
[5]
205 mm
[6]
13
SIMA² Master Station
MODBUS RTU, MODBUS TCP/IP to DCS
Assembly
Summary of Contents for SIMA 2
Page 43: ...43 AUMA worldwide...
