AUMA AMExC 01.1, Operation Instructions Manual

Page: 66 / 80

Information: Please state type and commission no. of the device (see name plate) when ordering spare parts.
Only original AUMA spare parts should be used. Failure to use original spare parts voids the warranty and exempts
AUMA from any liability. Delivered spare parts may slightly vary from the representation.
Type Designation No.
Sub-assembly Housing 001.0
Sub-assembly Local controls 002.0
Sub-assembly Selector switch 002.5
Sub-assembly Local controls board 003.0
Primary fuse 003.1
Fuse cover 003.2
Carrier for contactors 004.0
Sub-assembly Power supply 006.0
Secondary fuse F3 006.1
Secondary fuse F4 006.2
Sub-assembly Interface board 008.0
Interface board 008.1
Cover plate for interface board 008.2
Sub-assembly Logic board 009.0
Adapter board 013.0
Sub-assembly Cover 500.0
Sub-assembly Terminal board 501.0
Screw for control terminal 501.1
Washer for control terminal 501.2
Screw for power terminal 501.3
Washer for power terminal 501.4
Sub-assembly Pin carrier without pins 502.0
Sub-assembly Pin for controls 505.0
Sub-assembly Pin for motor 506.0
Sub-assembly Plug cover 507.0
Sub-assembly Switchgear 508.0
Padlock 509.1
Sub-assembly Line bushing (actuator connection) 532.0
Circlip 535.1
Set Seal kit S
66
SQEx 05.2 – SQEx 14.2 / SQREx 05.2 – SQREx 14.2
Spare parts AMExC 01.1