- 08 -
Loop Recording: Recording will begin automatically after powering
on with a microSD card in the device. Each recorded file is up to ten
minutes long, with old footage being replaced when microSD card
storage is full
Motion Detection Recording: Switch on motion detection in ‘Setup.’
This function is designed to monitor when you’ve parked and left your
vehicle but requires a continuous power supply. It will record video
each time motion is detected by the front or rear camera
Time-Lapse Recording: Switch on time-lapse recording in ‘Setup.’ This
function will capture a picture per second to make a video played at
30fps
●
●
●
Video Recording
Separate files are created for the recordings from front and rear
camera, so you can view each camera’s footage separately and at
full size. The recordings are unaffected by choice of screen view or
switching the screen off.
Emergency Recording
●
Manual File Backup
Press to back up the current file so that it won’t be overwritten. A
icon will appear in the top left of the LCD screen to indicate a
protected emergency recording is in progress
●
Auto File Backup
Once the G-sensor is activated by a sudden impact, the device will
automatically make a recording and protect it from being overwritten.
Adjust G-sensor sensitivity in the ‘Setup’ menu
Note:
Enter the playlist or setup menu (or disconnect power) to end
emergency recording mode.
