- 06 -
For optimal performance, install the AUKEY DR03 front/rear camera in the
top-center of your front/rear windshield, facing directly ahead/behind.
For the front camera, use either the sticker mount or suction mount. They
both have separate tilt and pivot adjustment. The rear camera is
mounted with its fixed-position sticker mount (there is also a blank spare).
This camera has a tiltable lens barrel to adapt to any rear windshield
angle
Use the 7m/23ft Mini-B Cable (with mini-B connectors at both ends) to
connect the two cameras. The L-shaped mini-B connector plugs into
the Mini-B AV Input of the front camera and the other end into the
Mini-B AV Output of the rear camera
Connect the 4m/13ft USB Mini-B Cable (with a standard USB-A
connector at one end) to one of the car charger ports and to the
front camera Mini-B Power Input
Cable routing should be as shown in the following two diagrams. Use the
cable clips to help fix the two cables conveniently and safely. A trim
removal tool is included for concealment of cables behind trim and
carpeting for a tidier finish
1.
2.
3.
4.
Front Camera
Dual-Port
USB Car Charger
Rear Camera
4m / 13ft USB Mini-B Cable
7m / 23ft USB Mini-B Cable
