Auerswald COMfortel 600, Operation Manual Setup And Operation, Page: 59 / 84

Operation and Configuration
COMfortel 600 - Setup and Operation V01 06/2014
59
4.
Use the arrow keys to scroll to the dial mode you want.
5.
Press the OK key.
Note: If you would like to change the dial mode again, repeat steps 3 to 5.
Setting the Flash Time
The telephone supports four different flash times: 100 ms, 120 ms, 300 ms and
600 ms. Configure the flash time according to the connection on which you
operate the telephone.
1.
Press the Menu key.
2.
Use the arrow keys to scroll to the SET FLASH menu.
3.
Press the OK key.
The currently set flash time is displayed.
4.
Use the arrow keys to scroll to the flash time you want.
5.
Press the OK key.
Note: If you would like to change the flash time again, repeat steps 3 to 5.
Resetting the Telephone to the Factory Settings
If necessary, you can reset your telephone back to the factory settings. When
this is done, all personal information (the caller list, for example) and any set-
tings you have configured (your telephone book, for example) will be deleted.
1.
Press the Menu key.
2.
Press the keys # 2 0 1 in sequence.
3.
Press the OK key.
Note: If you would like to cancel the operation, press the home key or the
back key.
Telephone Book
The telephone book is used for storing useful or frequently dialled telephone
numbers along with the associated names. You can enter up to 99 telephone
numbers into the telephone book.