Auerswald COMfortel 600, Operation Manual Setup And Operation, Page: 48 / 84

Preparation
48
COMfortel 600 - Setup and Operation V01 06/2014
Important: Always press onto the insert from the top (see Fig. 12 ). Pres-
sure exerted onto the front of the insert may shear off the ratchets holding
the insert.
Notes regarding handling:
To hang up the receiver, use the slot on the inside of the receiver to hang it
onto the hook you have just inserted in the receiver recess.
To hang up the receiver without terminating a call, use the slot on the inside
of the receiver to hang it onto the hook at the top of the telephone.
Connecting the Receiver
1.
Insert the RJ-10 connector at the longer, plane end of the spiral cord into
the socket labelled with
on the lower side of the telephone.
2.
Guide the cable to the outside using the corresponding cable channel.
3.
Insert the other RJ-10 connector of the spiral cord into the socket on the re-
ceiver.
Fig. 12: Pressing down the insert