manualshive.com logo in svg

Auerswald a/b-Audiobox, Operation Manual, Page: 5 / 40

Share
Download
Auerswald a/b-Audiobox Operation Manual Download Page 5

Important Information

a/b-Audiobox - Operation Guide - V03 10/2020

5

This section contains information that is necessary for you to operate your equipment safely.

Before you put the device into operation, it is essential that you read the safety information

described here and become familiar with how to use the device properly, and also the tech

-

nical data.

Safety Information

Warning: 

Handling the device improperly can cause a life-threatening elec

-

trical shock, or damage or destroy the device.
• Only qualified electricians may connect the device and the accessories

or perform  service  work  on  the  device.  If necessary,  commission an

authorised dealer to perform this work.

• Read the instructions for the device and keep them for future reference.
• When connecting the device to your PBX, also note the safety informa

-

tion and technical data in the manual for your PBX.

• When  connecting  an  a/b  switching  module,  please  also  refer  to  the

safety  information  and  technical  data  in  the  a/b  switching  module

instruction manual.

• This installation is not intended for use in areas children could possibly

be near. Install the device out of reach of children.

Warning: 

Touching live terminal clamps or power cables can cause life-

threatening electrical shocks.
• Only operate the device when it has been installed in a touch-safe way.
• Disconnect  the  connection  to  the  telephone  connection  on  the  PBX

before you carry out any work on the device.

• Ensure that any tools you use on live cables are sufficiently insulated.

Warning: 

Any liquid that penetrates the casing can result in a life-threaten

-

ing electric shock or can damage or destroy the device.
• Only operate the device in closed, dry rooms.
• When cleaning the casing, make sure that no liquid enters the casing.

Warning: 

Using the wrong power supply  could pose a fire hazard.

• Only approved current-limited power supplies according to EN60950 or

EN62368-1 with a type-limited power of maximum 100 W/VA may be

used.

Warning: 

Damage to the casing or the device can cause life-threatening

electrical shocks.
• Always arrange for a professional to carry out repairs. Please contact

your qualified electrician or contact the manufacturer directly.

Important Information

Summary of Contents for a/b-Audiobox









































Reviews:

No comments