Settings
30
a/b-Audiobox - Operation Guide - V03 10/2020
556
: The a/b switching modules remain switched on for 3 seconds.
557
: The a/b switching modules remain switched on for 3.5 seconds.
558
: The a/b switching modules remain switched on for 4 seconds.
559
: The a/b switching modules remain switched on for 4.5 seconds.
You will hear the confirmation tone (five sequential tones).
The a/b-Audiobox continues to be in programming mode. For ad
-
ditional programming actions, begin with the 3rd step.
Changing the PIN
We strongly recommend that you change the PIN to protect against unauthor
-
ised access.
Requirements:
– Connection has been made to the internal a/b port on a PBX
– An internal telephone number has been set up for the a/b-Audiobox on the
PBX
– Knowledge of the PIN (0000 in the factory settings)
– DTMF-enabled internal telephone or DTMF tone generator
– Programming mode has been initiated (by pressing and holding the pro
-
gramming key for five seconds)
1.
Pick up the receiver of an internal telephone.
2.
Dial the internal telephone number of the a/b-Audiobox.
This establishes the connection.
3.
Dial
*
.
You will hear the confirmation tone (five sequential tones).
Note:
If you only hear a short sound instead of the confirmation tone (after
restarting programming mode), enter the PIN and then dial
*
again.
4.
After the confirmation tone ends, dial the character string
29
.
5.
Enter the required PIN (1 to 6) and dial
#
.
6.
Enter the PIN again and dial
#
.