Operation
32
a/b-Audiobox - Operation Guide - V03 10/2020
This section describes how to use the device after commissioning.
Making an Announcement
Requirements
– Connection has been made to the internal a/b port on a PBX
– An internal telephone number has been set up for the a/b-Audiobox on the
PBX
– DTMF-enabled internal telephone or DTMF tone generator
– No programming mode
1.
Lift the receiver of an internal telephone.
2.
Dial the internal telephone number of the a/b-Audiobox.
This establishes the connection.
Note:
If audio transfer during connection establishment is disabled, switch
it on first by dialling the character string
*
1
.
If the sound of the gong before the announcement has been
switched on: You hear the gong.
3.
Say the announcement into the receiver.
4.
End the announcement by putting down the receiver or dial the character
string
#
*
.
The a/b-Audiobox disconnects.
Operation