Auerswald a/b-Audiobox, Operation Manual, Page: 34 / 40

Operation
34
a/b-Audiobox - Operation Guide - V03 10/2020
Switching over a Switching Function Manually
During the announcement you can switch over the switch contacts manually
(Switching in programming mode, see
page 26
).
Requirements
– Existing connection for announcement
•
Dial one of the following character strings.
##71
: Switches the switch contacts on.
##70
: Switches the switch contacts off.
You will hear the confirmation tone (five sequential tones).
Addressing a/b Switching Modules
During the announcement you can address the a/b switching modules for the
set switching time.
Requirements
– Existing connection for announcement
•
Dial one of the following character strings.
##1
Addresses a/b switching modules with switching frequency 1.
##2
Addresses a/b switching modules with switching frequency 2.
##3
Addresses a/b switching modules with switching frequency 3.
##4
Addresses a/b switching modules with switching frequency 4.
##5
Addresses a/b switching modules with switching frequency 5.
##6
Addresses a/b switching modules with switching frequency 6.
You will hear the confirmation tone (five sequential tones).